How many annual service calls are performed for Aplus?
Aplus Franchise · 2024 FDDAnswer from 2024 FDD Document
| Annual Service Call Frequency | 3X |
|---|---|
| Compressor Maintenance (Basic) | |
| Visually check for leaks. | X |
| Check and record suction & discharge pressure, oil pressure, room & ambient | X |
| temperature. | |
| Air Handling Unit (AHU) Maintenance (Basic) | |
| Install standard filters | X |
| Leave at site three additional sets of filters for site personnel to change each month. | X |
| Check electrical wiring and connections. Tighten loose connections. | X |
| Check and record amperage across blower motor. | X |
| Check tension, condition and alignment of belts. Adjust as necessary. | X |
| Lubricate shaft and motor bearing. | X |
| Condenser Maintenance (Basic) | |
| Check and record amperage across condenser fan motor. | X |
| Check electrical wiring and connections. Tighten loose connections. | X |
| Clean condensate lines and pans. | X |
| Check contactors and starters. | X |
| Cooling Maintenance (Spring only-May) | |
| Power wash condenser coil(s) and clean evaporator coil(s). | X |
| Change all belts. | X |
| Annual asset inventory report and analysis. | X |
| Heat Maintenance (Fall only-November) | |
| Verify pilot ignition-check for proper operation of primary fuel controls and safety | X |
| controls. Check and adjust thermostat. Check pump pressure (fuel oil). | |
| Check and clean flue. Replace oil filter and nozzle. | X |
Source: Item 23 — RECEIPT (FDD pages 68–302)
What This Means (2024 FDD)
According to Aplus's 2024 Franchise Disclosure Document, the frequency of annual service calls is three times per year. The document outlines specific maintenance tasks performed during these calls, including checks for leaks, recording pressure and temperature, filter replacements, electrical wiring inspections, and lubrication of components.
These service calls also include maintenance for the air handling unit (AHU) and condenser, such as checking wiring, tightening connections, cleaning condensate lines, and inspecting contactors and starters. Additional cooling maintenance is performed in the spring, including coil cleaning and belt changes. In the fall, heating maintenance includes verifying pilot ignition, checking fuel controls, and cleaning flues.
An annual asset inventory report and analysis is also conducted as part of the service. This comprehensive maintenance schedule suggests Aplus is committed to ensuring the proper functioning and longevity of equipment at its franchise locations. Franchisees can expect regular visits and a structured approach to maintaining essential equipment, which could help prevent costly breakdowns and ensure a consistent customer experience.